Tuning Methods

This week, we will discuss some of the many different ways to tune your guitar. Getting your guitar in tune is one of the most important first steps to becoming a competent guitar player.

Many beginning guitar players find it very difficult to tune a guitar. The reality is that the technique or tools you use really depends on the ability of your ears to perceive differences in pitch between two separate notes, and the ability to recognize good intonation when you hear it and the difference when you don't.

If you are just starting out and don't know the difference between tones, I recommend using an electronic tuner to do the work for you.

Although it is very important to develop your ear to be able to tune manually, an electronic tuner is a very good tool to have, as it can often overcome noisy environments and is virtually fool proof.

Some people find the ability to judge pitch easier than others. If you are one of those that find it difficult, understand that your ability to judge pitch will improve, along with your technique, the more you play. You will eventually develop a musical "ear" and it is a skill which develops with experience.

The best approach to good tuning is to take your time and go slowly and calmly. Being tense or in a hurry will find it hard to recognize whether a particular string is sharp or flat.

Always try to tune UP to pitch, not DOWN to a pitch. What that means is that you should slacken the string slightly so that it goes slightly flat and then tighten it to bring it up into tune. This helps to keep it stable at the right pitch.

For many guitarists, string slippage is a big problem. It can be virtually prevented by ensuring that you use the right guitar strings that fit and "stretching" them properly, by hitting them fairly hard, bending them or pulling them away from the guitar to give them a chance to settle down before playing them.

If you use lighter gauge strings, the problem of going out of tune is exaggerated. This problem can be common if you subject your guitar to drastic temperature changes, from a cold room to a warm room, or vice-versa.

The methods to be described will allow you to tune your guitar to itself (relative tuning). In order to be tuned to standard concert pitch, you must have at least one accurate reference note (found by using a device such as an electronic tuner).

Tuning to Chords

Guitars typically sound perfectly in tune in one chord but slightly out of tune in others. It's part of their nature. It is due to the intervals between notes being fixed by frets. In order to minimize this, the positioning of the frets is designed to spread out across the fingerboard any inaccuracies in the intervals between notes. In effect, the guitar will sound correctly in tune in very key. This is called "tempered tuning."

Tuning to chords is a great way to check and, if needed, adjust the compromise of the tuning. Once you have the open strings in tune with one another, play a chord, sounding each individual note and listening clearly to the intervals between them. I usually use a progression of the G, C, D chords to ensure that they all sound right. If they don't determine which note(s) sound out of tune and adjust accordingly.

Tuning to Harmonics

"Harmonic" notes will be covered in another lesson. If you don't know what they are, skip this method for now.

Harmonic notes often have a purer sound than the open strings of fretted notes. This is because of the phenomenon called "beat tones." Beat tones are generated when two pitches are close but not quite the same. If one note is vibrating at 440 Hz (A) and the other one is slightly flat, at, for instance 436 Hz, you will be able to hear 4 beat tones or pulses per second when you play them together. As the out of tune note is brought to the tone of the original note, the beats will slow down, or even disappear as they become totally in tune.

The place on the fret board to check this is the 5th fret on the lower string vs the 7th fret on the next highest string. For Example, if you were tuning the 'E' string and the 'A' string, you would ring the 5th fret harmonic on the 'E' string and measure the tone against the 7th fret harmonic on the 'A' string. This is the same on all strings with the exception of between the 'G' and the 'B'. The 5th fret on the 'G' should ring the same as the 4th fret 'B'.

I hope you find this helpful in developing your ear to tune your guitar.

For all of your guitar strings and guitar accessories needs, please visit www.trurewindmusic.com

Scales and Modes - A Brief Lesson in Theory

The earliest forms of scales have roots that go back to the ancient Greeks, named after their most important tribes - the Dorian, Phrygian, Lydian, and Mixolydian. Each of them contained eight notes (from the root to the octave). These notes were the equivalent to the notes on the white keys of the piano keyboard, written in descending order.

The Dorian scale descended from E, the Phrygian from D, the Lydian from C, and the Mixolydian from B.

Musicians from the Christian Church adopted these scales in the Middle Ages. But for some reason, they decided to introduce various changes. First, they reversed the order, to make them ascending. Second, they changed the root notes. Third, they changed the term from "scale" to "mode." This made the formerly known Greek Dorian scale the Dorian Mode and made it from D to D, the Phrygian Mode went from E to E, Lydian Mode from F to F, and the Mixolydian Mode went from G to G. And the Greek Lydian scale, originally descending from C, now ascended from C and was renamed the Ionian Mode. Also, the Greek Mixolydian Scale, which descended from B, now ascended from B and was renamed the Locrian Mode. The scale that began on the A was called the Aeolian Mode.

This now meant that there were 7 modes - one for each of the white keys. We have already seen that the characteristic sound of any scale or series of notes is determined by its step-pattern of tone or semi-tone intervals. Since each mode has its own step-pattern, each mode has it's own sound.

In the Middle Ages, the modal system was the source of melody. By the 16th Century, the increasing complexities of "polyphony" (music which contains 2 or more harmonized melody lines) were leading to the breakdown of the modal system.

There was a new harmonic language being developed as the 17th Century began. The concept of "tonality" was expanded to include the key system (which is another lesson). All music had a "key signature" which identified the tonic (or first) note of the scale as the "key-center" or "home key." The intervals between notes were fixed by their distance from the tonic note or key center.

The heart of the key system was the concept of diatonic major and minor scales. A "diatonic" scale comprises the notes proper to the key. The diatonic major scale has the same pattern of tones and semi-tones as the medieval Ionian Mode (started on C), and the diatonic natural minor scale has the same pattern as the Aeolian Mode (which started on A). The resemblance, however, is one of structure, not usage.

For all your guitar strings and accessories needs, check out www.trurewindmusic.com

Left-Hand Technique

(I would like to thank the Guitar Handbook for the following excerpt on left-hand fretting techniques)

The function of your left hand is to press the guitar strings down onto the frets in order to sound the required notes. Before your right hand strikes the strings, your left hand must be in position, creating a specific selection of fretted notes for your right hand to play.

Many of the lead guitarist's left-hand techniques - for example, hammering-on, string-bending, slides and vibratos - are all part of the arsenal of tricks associated primarily with the sound of the modern guitar. In contrast, the rhythm guitarist's left hand tends to be more concerned with fingering chord shapes. However, modern rhythm guitarists also use many syncopation and "chop" techniques that rely on the left hand for damping effects. It is, after all, left handed damping that creates specific time values by releasing the strings when it has sounded for the required duration, and that cancels unwanted notes when several strings are played at once.

To play a single clear note without touching any other strings, your fingers should be arched so that the tips come down onto the fretboard more or less at right angles to it. This obviously means that your fingernails should not protrude beyond the ends of your fingertips. You should keep them trimmed.

When you fret a strings, you should hold it down between two frets, but just behind the one you want. The vibrating length of the strings will then be the distance from the higher of the frets to the saddle.

Use only as much finger pressure as is necessary to make the note sound clearly. Pressing too hard will tire your fingers and may hurt. Beginners will experience this immediately-especially with steel strings-since it takes a while to toughen the fingertips and learn how to apply just the right amount of pressure to the guitar strings.

We will get in to more specific style based left-hand techniques in future posts, but that is the foundation.

Good luck, I hope this helps!

www.trurewindmusic.com

How to Play Simple Songs Today

Most popular music on the radio or anywhere you hear it today consists of a few basic chords. These chords are put in to a succession to convey the feeling or mood that is desired by the song writer.

When you take these chord progressions and utilize different picking patterns, you should be able to hear how these same chords can sound quite different in different songs.

The picking pattern on you picking hand is an important skill to master. While I was looking for a lesson to share this week, I came across a cool video that demonstrates a pretty simple excercise on how to improve your strumming techniques.

The video helps demonstrate how to practice alternate (up and down) strumming on the guitar strings, while changing chord patterns with your fret hand.

I hope you find this video helpful in helping you become a better strummer and ultimately a better guitar player.



www.trurewindmusic.com

How to Play Beginner Guitar Chords

Playing the beginner guitar chords is a very important step in becoming an accomplished guitar player. The reality is that virtually every song is based off of fundamental chords or some variation of those chords.

I found a cool video that helps visualize the placement of your fingers on the guitar strings and what those chords should sound like. I thought it was a pretty cool lesson on how to be sure you are placing your fingers in the proper places on the strings and helps you hear the difference between those chords.

If you can master these basic chords, you should be able to play just about any song you want to.

I hope you find this video valuable.



www.trurewindmusic.com

The Major Scale

The Major Scale is the building block for music. It is basically a 7 note step. It is made up of whole steps and half steps. Any time you skip a fret and play the next note, it is a whole step, if you play the next fret, it is called a "half step."

The note you start on is the key of the scale. If you follow the step pattern of whole step, whole step, half step, whole step, whole step, whole step, half step.

Try playing the scale on one guitar string only before moving on to other ways. I found a cool video that explains what I have written here:



www.trurewindmusic.com

Guitar 101 - Using all of your fingers on the fret hand

When you are learning to play guitar, it is important to build up your finger strength and be able to use all of the fingers on your fret hand equally.

I found a cool video on You tube that demonstrates a pretty simple excercise to get your fret hand finger strength up. Practice this exercise for a few minutes a day and you will find that your fret hand finger strength will improve in no time.

The guitar strings may be painful at first, but that will pass as you build up calluses on your finger tips.



www.trurewindmusic.com